Ltd. Ivtehnomash — the production of metallized textile materials

Ltd. "Ivtehnomash" was founded in 2000 as a mechanical engineering firm, focused on the complex issue of innovative equipment for plasma chemical processing and plating roll materials such as fabrics, films, non-wovens, artificial leather, etc.
In 2005 the company launched the first commercial installation of the work of magnetron sputtering, which allowed metallized textiles and film widths up to 170 cm, capacity up to 3000 linear meters per month.


 Photo source:ivtechnomash.ru


 Photo source:ivtechnomash.ru


 Photo source:ivtechnomash.ru

To date, the company has increased capacity on the order. Available in the enterprise equipment allows full range of activities from pre-drying before plasma treatment, plating and cutting material.


 Photo source:ivtechnomash.ru


 Photo source:ivtechnomash.ru


 Photo source:ivtechnomash.ru


 Photo source:ivtechnomash.ru

Industrial equipment allows metallized polymer film (polyethylene terephthalate, polypropylene, polyethylene, polyimide, polycarbonate, etc.) with a width of 170 cm and a thickness of 12 microns or more. Thus it is possible coating of aluminum, copper, silver, stainless steel, titanium, titanium nitride, etc.
Since the equipment allows precise control of coating thickness, you may receive the conductive layers in a wide range of surface resistivity. After deposition, the film may be slit and wound into rolls of predetermined width. Perhaps sputtering of metal coatings on polyethylene terephthalate film to yield different resistivities within ± 10% of the high adhesion metal film to the substrate.


 Photo source:ivtechnomash.ru

Plating technique textile materials by ion-plasma spraying allows synthetic fabric with a metallic sheen. On the surface of the tissue is deposited a thin film of the metal or alloy, giving the noble fabrics and original shade, for example, pearl, titanium, metallic luster stainless steel, gold, silver, aluminum, bronze, etc. These colors and shades can not be achieved by other known methods currently upgrading of textile materials: smooth dyeing, pigment printing, metallization of electrolyte solutions, vacuum thermal evaporation.


 Photo source:ivtechnomash.ru

Because the processing of tissues occurs under mild conditions, the so-called low-temperature plasma — the fabric retains soft feel, air and moisture permeability, drape, strength characteristics.


 Photo source:ivtechnomash.ru

The metal layer significantly reduces the electrical surface resistance of the tissue, which makes them excellent anti-static properties. Such tissues are not completely electrified to wear and do not accumulate electric charge. They are made of fabric and capable of conducting an electric current, they can be used as a flexible conductive elements that can be soldered — is important in creating the so-called smart-textiles.

Spray the textile thin silver layer gives the material good bactericidal properties. This can be very important for the production of bed linen for burn centers and maternity homes.


 Photo source:ivtechnomash.ru

Were fabricated and successfully tested the experimental batch masking sets that apply to camouflage military equipment and military facilities in summer vegetation background from optical and radar reconnaissance


 Photo source:ivtechnomash.ru

Like this post? Please share to your friends: