The basis of a multi-layer, or heterogeneous, linoleum (namely the type designed for use in residential areas) is usually a glass fiber. It has consistently applied a primer first, then the front layer. Last smoothes the surface and prepares it for the application of the pattern that is printed by the engraved cylinder. The larger the circumferential length «press» (from 1 to 1.5 m), the pattern is repeated less often. Also in the arsenal of every manufacturing company has its own special method for achieving more natural figure. Due to the continuous improvement of technology texture linoleum from year to year it is becoming more similar to the texture or texture of the material, which he plays. Moreover, even to the touch. Unlike, say, «fake» polyvinylchloride «tiles» of this ceramic or artificial «parquet» of natural piece is not easy. Unable to pass only the disadvantages associated «prototypes», for example, the cold tiles or wooden floorboards creak. Well, yes it does we need?
For pattern should wear layer — transparent PVC coating that protects from scratches and drawing — from abrasion. Of course, on the thickness of the PVC layer depends directly on the life of linoleum. Typically, this value is from 0.15 to 0.3 mm. The resulting «layer cake» baked in the oven, rolled on the inner side of the base substrate (usually — foam PVC, rarely -dzhut, felt, polyester) and then baked. The result is a coating with a thickness of 2 to 5 mm. However, it is important not aggregate thickness, and its relation to the weight of the coating