In the Urals, the production launched robots

 

Production process at the FSUE "" October " now run by robots.

In the workshop for the production of small parts of body are four robotic complex Finnish company Fastems. The equipment will increase the level of automation and provide machining of parts in a "deserted" production.

Delivery and commissioning of robots in operation the company has carried out "Pumori-engineering invest."

Robotic modules RPC-20 combined in one system four lathes LT 2000 EX Corporation of Japan OKUMA. This system served by a robot (manipulator), which provides automatic operation for

Continue reading In the Urals, the production launched robots

In the Western Military District received more than 100 new tractors

KAMAZ with automatic transmission

Military motorists Western Military Region for the first time today started development of new KAMAZ trucks equipped with an automatic transmission. Military drivers, conscripts, began training on the transport of heavy loads on trucks KAMAZ-65225.

Before you get behind the wheel of the newest truck, each of conscripts was theoretical training in specialized classrooms equipped with modern training equipment, including interactive whiteboards. After completion of the theoretical training of cadets training center have undergone simulator training on multimedia simulation simulator, which simulates actual control of heavy wheeled and tracked vehicles of different brands.

Continue reading In the Western Military District received more than 100 new tractors

NIKIMT-Atomstroy (Moscow) has prepared a unique set of automatic welding

JSC "NIKIMT-Atomstroy" was established in 2001 in order to centralize and efficiency construction work performed at nuclear energy and industry Rosatom, as well as for recovery of construction and assembly capacity of the industry.

Forces of "NIKIMT-Atomstroy" designed and built complex multifunctional automatic orbital welding of circumferential joints of large diameter (350 to more than 1400 mm) from the inside of pipes, which has no equivalent in domestic practice.

 

This allows you to perform complex multi-pass TIG welding and cladding of corrosion on the internal surface of pipes and pipe spools of NPP

Continue reading NIKIMT-Atomstroy (Moscow) has prepared a unique set of automatic welding

Irkutsk Relay Factory technically rearming

Relay at the Irkutsk plant grows modernization process for the preparation of plant production to the development of new products. The list of new equipment released to the shop for the last 5 years, about forty names: wire-cut and electro erosion installation band saw, circular grinding, turning, grinding and optical polishing machines, chemistry analyzer metal Machining Center, Chamber furnaces, line-gilding and silvering preparation for electroplating, automatic longitudinal turning, CNC nitrogen gas filling station for the internal volume of products automatic lathes, CNC turning up to a diameter of 16 mm, Tumbling multifunction machine, Installation for the production of deionized water,

Continue reading Irkutsk Relay Factory technically rearming

Uralvagonzavod designed and built a unique platform

The designers of the Ural KB railcar parent company corporation "Uralvagonzavod" created a platform specific model 23-5166. As the developers, the product has no analogues in Russia. It is produced by OAO "YUGELEKTRO." All the work on its design and production were carried out on Uralvagonzavod in a short time.

Wagon model 23-5166 is made in one piece. It is designed for use as part of in-chassis carrier platform, which is used at Novovoronezh NPP-2 technology for transport vehicles carrying cases and covers for cans sealed during overloads and audits reactors.

The uniqueness of the platform

Continue reading Uralvagonzavod designed and built a unique platform

Line of automatic winding step of cores

For the first time in Russia designed a line of automatic winding step of magnetic LAN-120-500cm. The line is designed for winding round and rectangular stepped section of magnetic tape electrical steel.

                                           rn 

Petrozavodskmash launched into operation a complex automated welding

At Petrozavodskmash (part of Rosatom Engineering Division — AtomEnergoMash) put into operation a new system for automatic submerged arc welding. On the new equipment produced surfacing on the side steam generator unit.

Welding system was purchased as part of the investment program, which is held at the JSC "Petrozavodskmash" under the direction of the Management Company JSC "AEM technology" in order to increase production and development of production equipment for the nuclear industry in Russia.       Welding system consists of two parts — the portal and the welding of the column. It allows the outer and

Continue reading Petrozavodskmash launched into operation a complex automated welding

The newest gun systems for naval ships was successfully tested

27/12/2012

The first production model made of "CRI" Petrel "advanced 100-mm automatic naval gun mount A190-01" Universal "has successfully passed the qualification test, confirmed full compliance with the requirements of the customer and shipped to military shipbuilders to equip small missile ship" Hail Svijazhsk "project 21631, under construction at the shipyard Zelenodol’sk named after M. Gorky. This Central Navy Portal source in the "savages".

According to the terms of reference of the Navy in the Central Research Institute "Petrel" created a 100-mm automatic gun ship setting a single-tower. It has a rate of 80 rounds per minute and the

Continue reading The newest gun systems for naval ships was successfully tested

ZAO Siberian Agrarian Group has opened a new incubator poultry Tomsk

December 14, in the Tomsk region hosted the opening ceremony of the new hatchery poultry "Tomsk" growing breeding birds in the Youth Section. To build and equip the incubator took about 170 million rubles.

The new incubator will replace the three existing, obsolete. To date, the Tomsk Region is the most powerful and modern workshop incubation capacity of 22 million hatching eggs per year, which will allow a 1.5-fold increase in poultry production in the region.

Currently, the site is working Molodezhnenskoy 35 workshops for floor (poultry population of 900,000 broilers) and conducted a large-scale reconstruction of the 11

Continue reading ZAO Siberian Agrarian Group has opened a new incubator poultry Tomsk

At Arzamas Instrument Factory set machine for high-precision sheet metal bending

Machinery equipment shop number 57 Arzamas Instrument Plant added Turkish plate bending machine designed for bending sheet metal. The machine will allow for high-precision and high-speed metal bending when performing plumbing work.

"The equipment is equipped with modern electronic and hydraulic devices, fully controlled by the control system. The synchronization of the EMC-hydraulic valves, preset fold carried out in automatic mode using the control pedal and the mechanism of "lifting and lowering." Press has easy-to-use multi-function CNC system, which automatically calculates and optimizes its performance, pointing to the graphic display bend sequence. By introducing an interactive program parameters of

Continue reading At Arzamas Instrument Factory set machine for high-precision sheet metal bending

SQL - 17 | 0,598 сек. | 7.76 МБ