Volgograd region to open a new plant for the production of components for the automotive industry

CJSC "VATI-AUTO" (Volga city of Volgograd region.) Is open on the basis of the Volga Plant Asbestos technical products in April 2003 and is part of the holding "VATI."

Eighth of November 2011 The opening ceremony of the new plant, which began production of parts for domestic and foreign cars.

This new production for the most part focused on the supply of products such as the European Assembly line: Skoda auto as, Triumph motorcycles limited, Zetor tractors as, Marting S ro, Emcon technologies Germany, Zetor PDC as, Monsta Brno, Tedom, Auoto Kobliha SRO, as well as major Russian

Continue reading Volgograd region to open a new plant for the production of components for the automotive industry

Severstal will supply the metal for facial details of the new model Kia Rio

JSC "Severstal" has started deliveries of metal for the front of the roof of the new model Kia Rio. Earlier, a similar agreement was reached in respect of another vehicle — Hyundai Solaris (sedan and hatchback).

 Photo source:stalcom.net

"Our experience in quality and timeliness of delivery approved by the Hyundai Motor Company in the fourth quarter of 2011, we plan to begin shipping the new positions, including metal for facial details. In connection with plans to increase production at the plant Hyundai Motor Manufacturing Rus in 2012, "Severstal" is planning to increase the supply of steel in 2012, three

Continue reading Severstal will supply the metal for facial details of the new model Kia Rio

Ford Motor Company were audited by MMK

Magnitogorsk Iron and Steel Works has passed the external audit process of production of flat rolled conducted at the U.S. leader’s Engineering Ford Motor Company as part of the acceptance of metal JSC "MMK".

As reported by the information and public relations of CMI in its results indicated that the steelmaker potentially ready to execute orders on claims Ford Motor Company.

Among the strengths of the plant specially marked commissioning of the first stage of a cold rolling mill 2000, which provides for automated quality control system of the strip. A positive assessment of the audit deserved began

Continue reading Ford Motor Company were audited by MMK

JSC MMK increases the supply of products for the automotive industry

In the first half of 2011, MMK shipped to the address of automobile enterprises more steel than in all of 2009.

 Photo source:ura.ru

Realizing the strategic goal of becoming a leading supplier of steel products for the Russian automotive industry, CMI has steadily increased shipment of its products to the address of the domestic auto industry. So, if in 2009 the volume of supplies of Russian car totaled 209 thousand tons (in this case the share of supply auto industry accounted for 4.8% of the shipments of steel products to the Russian market CMI), the 2010 shipment of

Continue reading JSC MMK increases the supply of products for the automotive industry

In Ufa, opened the second phase of the plant for the production of components for the automotive industry

Ufa July 19

Russian-German joint venture Witzenmann-Russia introduced in Ufa, the second phase of the plant for the production of components for the automotive industry.

The representative of the joint venture at the opening of the second phase of the plant for the production of compressors, exhaust systems and bellows for the automotive industry, said that the investment in construction amounted to about 1 billion rubles, the design capacity — 1.5 million units per year in the amount of 1.5 billion rubles. 

In Kaluga open training center — unique for Russia

August 27 in Kaluga Training center for training and retraining of personnel for the automotive industry the opening ceremony of the new module.

The ceremony was attended by the Minister of Education and Science of the Russian Federation Dmitry Livanov, Kaluga Region Governor Anatoly Artamonov, and guide automobile enterprises — "Peugeot Citroen Mitsubishi Cars Rus" and "Volkswagen Group Rus."

In the new module of the Training Center, in addition to teaching classes, presented as full cycles of automobile production, and individual parts are modeled by means of modern simulators. The center is equipped with modern equipment and methodological base of

Continue reading In Kaluga open training center — unique for Russia

The plant dies and molds GAZ Group celebrated its 45th anniversary

The plant dies and molds came into operation in June 1967 in Nizhny Novgorod, as the basic enterprise for the production of equipment for the entire automotive industry of the USSR.

Currently The plant dies and molds Division "Automotive components" of "GAZ Group" — one of the leading Russian manufacturers of tooling.

Plant vypolnyakt full range of design, manufacture, service and repair of molds, stamping equipment and control devices of any complexity.

Now the company is actively developing its production output for the automotive industry, as well as developing new markets for themselves — for example, working with aircraft manufacturers.

Continue reading The plant dies and molds GAZ Group celebrated its 45th anniversary

MMK increases its supply automakers

In 2011, for supply of CMI to the auto companies operating in Russia increased by 13.5% compared to 2010 (to $ 461 thousand tons). Thus in 2011 by 0.6%, the share of the automotive industry in the structure of shipments of "MMK" on the Russian domestic market.

Currently, CMI is actively developing new products for the automotive industry. The enterprise has adopted and implemented a program of metal acceptance of "MMK" in Russian and foreign automakers, according to which the work on the approval of the technical processes and products from the world’s leading enterprise (Ford Motor Company, General

Continue reading MMK increases its supply automakers

Gestamp Severstal Vsevolojsk received the highest status supplier of components for Ford

Ltd. "Gestamp Severstal Vsevolojsk" joint project "Severstal" and Gestamp Automocion for production of metal components for the automotive industry, has received from the car manufacturer Ford the highest standard of product quality — Q1 (Quality 1).

Q1 supplier status means that the company complies with the requirements and standards that, Ford makes their suppliers around the world. This refers to the quality of products, streamlined logistics process, availability of cleaner production, compliance with international quality standards.

"The award of the status of Q1 proven high current level of our production, management and organization of production, — said Dmitry Gorshkov, Director

Continue reading Gestamp Severstal Vsevolojsk received the highest status supplier of components for Ford

JSC MMK increases the supply of products for the automotive industry

In the first half of 2011, MMK shipped to the address of automobile enterprises more steel than in all of 2009.

 Photo source:ura.ru

Realizing the strategic goal of becoming a leading supplier of steel products for the Russian automotive industry, CMI has steadily increased shipment of its products to the address of the domestic auto industry. So, if in 2009 the volume of supplies of Russian car totaled 209 thousand tons (in this case the share of supply auto industry accounted for 4.8% of the shipments of steel products to the Russian market CMI), the 2010 shipment of

Continue reading JSC MMK increases the supply of products for the automotive industry

SQL - 17 | 0,691 сек. | 7.71 МБ