JSC MMK has completed the construction of the metallurgical complex MMK-ATAKAS

July 15

Magnitogorsk Iron and Steel Works (MMK) announces the commissioning of a continuous hot-dip galvanizing (ANGTS) at the production site MMK-Atakas in Istanbul (Turkey). ANGTS launch marks the completion of the metallurgical complex MMK-Atakas, erected at two sites — in Iskenderun and Istanbul. Construction of the complex in Iskenderun was completed in the spring of 2011

The design capacity of ANGTS in Istanbul is 450 thousand tons of galvanized steel a year. Production units will be available to consumers, as well as used as a tackle for a further production line coating line with capacity of 200

Continue reading JSC MMK has completed the construction of the metallurgical complex MMK-ATAKAS

JSC Kuzbassenergo started construction of gas turbine Novokuznetsk

JSC "Kuzbassenergo" started construction of a gas-turbine power station Novokuznetsk (Novokuznetsk GTPS) installed capacity of 298 MW.

Novokuznetskaya gas turbine built in the framework of implementation of the commitments of "Kuzbassenergo" to the Government of the Russian Federation on the introduction of new generation capacity and in accordance with the implementation of the agreement on power supply (PDM). The project envisages the construction of 2 gas turbines (GT) with a total capacity of 298 MW (2 x 149 MW). Put in the work Novokuznetskaya gas turbine, which is built on the site of the Kuznetsk CHP "Kuzbassenergo" energy plan

Continue reading JSC Kuzbassenergo started construction of gas turbine Novokuznetsk

JSC Daltehenergo completes the modernization of thermal power station cooling towers of the Annunciation

JSC "Daltehenergo" (part of the holding company "RAO Energy System of East"), as prime contractor, is implementing the project "Application of innovative solutions for the reconstruction of the cooling tower number 2 of the Annunciation CHP using polymeric materials." Customer Project — OJSC "Far Eastern Generating Company".

Cooling towers of the Annunciation CHP

During the renovation is to replace asbestos sprayers cooling tower for reliable operation and easy-to-repair plastic irrigation system. Earlier turbine station could not reach full capacity in the summer due to lack of cooling water. After upgrading with innovative solutions, plastic sprinklers will increase the capacity of

Continue reading JSC Daltehenergo completes the modernization of thermal power station cooling towers of the Annunciation

JSC Baltkran put in Zabaykalsk four gantry cranes

Baltkran received a major order to supply four gantry cranes with a capacity of over 150 tons per Zabaykalsk.

The cranes will be working on a railway terminal on the Sino-Russian border. Construction of the railway platform is part of the investment project to expand trade and economic relations between China and Russia. After the completion of the new station will take the first place in terms of handling large, heavy, bulk and other cargo in Zabaikalsk and border zone. Delivery of the cranes is planned for late 2012.

In just the last few years Baltkran put more than

Continue reading JSC Baltkran put in Zabaykalsk four gantry cranes

Of crane passed the point of 1,000 cranes made in 2013

1000th Ivanovec in 2013

In mid-June of "crane" moved abroad in 1000 produced cranes in 2013. The rate of growth of output crane "Ivanovec" compared with last year accounted for more than 42%. "These figures are made possible largely due to the performance of the unique capacity automated complex for the production of arrows with ovoid cross-section profile, — said the first deputy general director of the plant Sergey Eremin. — We hope that in the near future market conditions do not change, which will allow us to maintain the current end of the year the growth rate

Continue reading Of crane passed the point of 1,000 cranes made in 2013

Of crane passed the point of 1,000 cranes made in 2013

In mid-June of "crane" moved abroad in 1000 produced cranes in 2013. The rate of growth of output crane "Ivanovec" compared with last year accounted for more than 42%.

"These figures are made possible largely due to the performance of the unique capacity automated complex for the production of arrows with ovoid cross-section profile, — said the first deputy general director of the plant Sergey Eremin. — We hope that in the near future market conditions do not change, which will allow us to maintain the current end of the year the growth rate of mobile cranes.

Continue reading Of crane passed the point of 1,000 cranes made in 2013

Turboatom continues to work on the third water turbine for the Dniester PSP (Ukraine)

In June 2013 the specialists of "Turboatom" made and passed by the shipment volute turbine under construction for the Dniester PSP number three. 

Volute is designed to supply water to the turbine guide vanes. Diameter of inlet chamber is more than 5.6 m, the center — 12.2 m, weight — about 213 tons Currently under way is the production of turbine stator, formerly the company manufactured and shipped to the station embedded parts hydraulic, including cone, piping and other equipment. For the Dniester PSP "Turboatom" produces a reversible Francis turbine ORI 170-B-730 maximum capacity of 390

Continue reading Turboatom continues to work on the third water turbine for the Dniester PSP (Ukraine)

Turboatom manufactured impeller chamber to Kremenchug HPP (Ukraine)

In September 2013, "Turboatom" has completed the first phase of work on a new order for the Kremenchug HPP (station number 7).

Specialists of the company produced a chamber of the impeller and turbine parts mortgages. Control equipment has been assembled and delivered to the customer before the end of September it will be shipped to the station. 

According to the contract signed in July 2011, "Turboatom" will produce a reconstruction of three Kaplan turbines rated capacity of 58 MW with the replacement of the impeller diameter of 8 m, guide blades and bearings. As

Continue reading Turboatom manufactured impeller chamber to Kremenchug HPP (Ukraine)

Turboatom manufactured and shipped to the medium-pressure rotor (RSD) for the Stavropol GRES.

January 6, 2012 "Turboatom" sent to the plant medium-pressure rotor with redesigned rotor blades and diaphragms of the 5th stage of the RNC in part to the low-pressure turbine K-300-240-2.

 Photo source:com.ua

RSD took control of the geometric dimensions and balance, which examines the vibration characteristics. Rotor oblopachen upgraded rotor blades closed bandage. This innovation will increase the capacity of the unit and increase efficiency. The contract for the production was signed in September 2010. In 2011, the company has provided a repair company Stavropol TPP spare parts.

FAQ: Stavropol GRES is located in the village of Solnechnodol'sk,

Continue reading Turboatom manufactured and shipped to the medium-pressure rotor (RSD) for the Stavropol GRES.

Turboatom completes the reconstruction of the eighth unit Kurakhovskaya TPP

 Photo source:com.ua

Completed shipment of units to upgrade the block number 8 Kurakhovskaya TPP. In November, the customer was handed control assembly of medium-pressure cylinder (MPC) to the rotor (RSD).

MPC has been sent to the station, the RNC transferred to packaging and shipping.

At the 8 th block Kurakhovskaya CHP plant is reconstructing a steam turbine K-200-130-1 of 200 MW of the Leningrad Metal Plant (Russia) with a full replacement cylinders of high, medium and low pressure.

After upgrading the capacity of thermal power will increase by 10 MW, will increase efficiency of fuel consumption

Continue reading Turboatom completes the reconstruction of the eighth unit Kurakhovskaya TPP

SQL - 16 | 1,024 сек. | 7.16 МБ