New wind power plant in the Orenburg

On Tulganskaya electromechanical plant in the Orenburg region in the run up wind power plant with capacity of 200 kilowatts, and three mini-boiler capacity of 100 kilowatts each.

Consumption is reduced by about 20 percent, says the director of the plant, Alexander Kolesnikov. Wind farm was purchased in Europe for three million rubles. At the factory setting had to overhaul podremontirovat. Return on investments in the company plan in about a year.

— The use of wind energy in the work of the whole enterprise — new for our area, — The chief of the department for

Continue reading New wind power plant in the Orenburg

NLMK-commissioned the new complex for long products

19.01.2011 In December 2010, the complex rolling mill NSMMZ in Berezovsky (NLMK-Long Products, a subsidiary of NLMK) has received a positive opinion of the Federal Service for Ecological, Technological and Nuclear Supervision of the Russian Federation, as well as permission to start-up.

The shop design capacity of about 1 million tons of steel a year is an important part of the production chain of NLMK-uniting the scrap metal industry, electric furnace, Section and hardware production. The parameters of the project and workshop equipment makes it one of the most modern and high-tech in Russia. The complex is equipped with

Continue reading NLMK-commissioned the new complex for long products

NLMK increased its production capacity for steel

NLMK on its production site in Lipetsk has commissioned the third unit polymer coating on galvanized cold-rolled (APP-3) with capacity of 200 thousand tons per year.

Its operation will increase the total capacity of NLMK's production of this type of steel by 53% to 580 thousand tons a year and will give the opportunity to strengthen its position in the market rental for construction industry.

The project, worth more than 3 billion rubles aims to expand output of high value-added and implemented in the framework of the 2nd stage of the program of modernization. APP-3 increased the

Continue reading NLMK increased its production capacity for steel

NLMK increased power and efficiency of auxiliary materials

NLMK has commissioned a lime-kiln capacity of 800 tons per day (256 tons per year) for the production of metallurgical lime used in the steelmaking process. The new unit will increase the performance of refractory plant by almost 20%, fully satisfy the growing needs of production in Lipetsk after commissioning in 2012 of new capacity for the production of iron and steel.

Compared to the existing counterparts at NLMK new furnace has an almost 2-fold greater productivity. The design of the unit used modern refractories and burners. Automatic control of the roasting process is conducted at

Continue reading NLMK increased power and efficiency of auxiliary materials

NLMK increased power and efficiency of auxiliary materials

NLMK has commissioned the lime-kiln capacity of 800 tons per day (256 tons per year) for the production of metallurgical lime used in the steelmaking process. The new unit will increase the performance of refractory plant by almost 20%, fully satisfy the growing needs of production in Lipetsk after commissioning in 2012 of new capacity for the production of iron and steel.

Compared to the existing counterparts at NLMK new furnace has an almost 2-fold greater productivity. The design of the unit used modern refractories and burners. Automatic control of the roasting process is conducted at all

Continue reading NLMK increased power and efficiency of auxiliary materials

NLMK increases the capacity of the complex secondary treatment technology

NLMK has commissioned a new unit "ladle-furnace" (APC) with a capacity of 2 million tons of steel per year. Its operation will expand the vintage composition of the steel and improve the quality of the metal by reducing the content in the non-metallic inclusions and sulfur (0.001%).

High environmental characteristics of modern agriculture and dust filters are provided by the system. The effectiveness of cleaning dust from flue gas is 99.5%. Implementation of the project will increase the plant capacity of 200 tonnes / year, reduce the consumption of de-oxidants, ferroalloys and refractories. Building installation was carried out

Continue reading NLMK increases the capacity of the complex secondary treatment technology

NLMK increases the production capacity of steel billets

 Photo source:uas.su

In steel production in Lipetsk first product on the reconstructed continuous casting machine (CCM-3) vertical type with capacity of 1 million tons per year. Reconstruction has increased the capacity of the unit up to 300 tons of steel per year due to the higher casting speed and reduce turnaround time. Enhanced product mix of the equipment with a maximum thickness of steel billets up to 315 mm, and improved the quality of the metal as a result of higher automation of the production process.

The project cost about 3.6 billion rubles. implemented as part of

Continue reading NLMK increases the production capacity of steel billets

NLMK upgrades steelmaking

 Photo source:metalinfo.ru

On the main production ploschadkeNLMK in Lipetsk begun installation of the main equipment of the reconstructed continuous casting machine number 3 (CCM-3).

The upgrade will increase the production capacity of the unit by more than 300 tons per year to 1 million tonnes per year, the press service of the company.

CCM-3 is designed for the production of a wide assortment of high-quality slabs of various grades of steel for further processing into flat products. Aggregate productivity growth will be achieved through the introduction of modern equipment, increase the rate of metal casting by 20-25%

Continue reading NLMK upgrades steelmaking

NLMK buys new equipment for energy production

March 2, 2011

NLMK has concluded contracts for the supply of new equipment for energy production at the main site in Lipetsk, totaling more than 2.1 billion rubles.

The contract with JSC "ESC" Union "(Russia) includes delivery from March 2012 to September 2012 equipment of a steam turbine generator with a capacity of 50 MW district heating selection for the current CHP. Its launch in 2013 after the withdrawal of obsolete unit (1956) will provide a reliable supply of electricity and workshops will keep the level of its own electricity production at the plant.

The contract

Continue reading NLMK buys new equipment for energy production

NLMK has commissioned unit polymer coating on galvanized cold-rolled capacity of 200 thousand tons per year

March 21, 2011

At the production site Novolipetsk Metallurgical Combine (Lipetsk) commissioned the third unit polymer coating on galvanized cold-rolled (APP-3) with capacity of 200 thousand tons per year. Its launch increases the capacity of the company for the production of this type of steel by 53% — up to 580 thousand tons per year.

The project, worth more than 3 billion rubles. aims to expand the output of high value-added and implemented in the framework of the 2nd stage of the program of modernization.

APP-3 allows you to produce colored strips of thickness 0.3-0.8 mm

Continue reading NLMK has commissioned unit polymer coating on galvanized cold-rolled capacity of 200 thousand tons per year

SQL - 16 | 0,811 сек. | 7.15 МБ