Chaika-Service introduced new models

GAZ-33081 "Sadko" with the crane Amco Veba 105 2s

Factory "Chaika-Service" produced another practical and reliable two-row side GAZ-33081 "Sadko" with the Italian loader crane Amco Veba 105 2s.

Features of hydraulic manipulator:

• Capacity at maximum radius — 715 kg; • Maximum boom — 5.7 meters; • Capacity at the minimum radius — 1270 kg; • Minimum flight — 3.28 meters;

This car will not only transport the cargo, but also plunge into the board, and then unload it. This means that not what attract additional labor, thus saving time

Continue reading Chaika-Service introduced new models

Car Factory Chaika-Service introduced new items

Automobile factory "Chaika-Service" took part in the international exhibition «COMTRANS-2013", held in Moscow from 10 to 14 September inclusive.

AZ "Chaika-Service" was presented for review the following technique:

The novelty of the Nizhny Novgorod plant — concrete pump. The first concrete pump with a height of 38 meters on the chassis of KAMAZ-6520; Now the popular press in the project, designed and embodied by AZ "Chaika-Service" — GAZ 33088 "Taiga". This is a brand new 7-seat cabin on GAZ-33081 "Sadko" to shift the van. A favorite of the audience and cameras; Tow truck with a

Continue reading Car Factory Chaika-Service introduced new items

Chaika-Service is auto on GAZ-33106 with the Valdai

axle trailer

Automobile factory "Chaika-Service" released transporter platform and slide-type axle trailer based on GAZ-33106 "Valdai".

Car carrier allows you to transport 3 cars total mass of 6.8 tons.

Equipment transporter sliding platform allows you to use it both as an independent tow truck, and as a transporter in the trailer. Loading the car onto the platform by using a professional hydraulic winch WARN c traction 4.1 tons

Winch mounted on the front of the platform for enhanced bracket. The design of the bracket allows the winch to move laterally, depending on the

Continue reading Chaika-Service is auto on GAZ-33106 with the Valdai

AZ Chaika-Service manufactured autohydraulic on KAMAZ-65115

Automobile Factory "Chaika-Service" issued autohydraulic Russian-Italian production with a combined telescopic tower Socage DA-26 on the basis of KAMAZ-65115. Features: height AGP — 28 m, flight — 15.5 m, Capacity bassinet — 250 kg. The hoist is equipped with electrical cradle, allowing the operator to work on power lines and communication with voltages up to 1000V with no blackouts in the absence of precipitation. Combined telescopic boom allows for vertical lift with a pantograph, followed by a horizontal boom extension or the desired angle. This design feature is common to all models of the series DA. Knee aerial

Continue reading AZ Chaika-Service manufactured autohydraulic on KAMAZ-65115

AZ Chaika-Service issued a motor vehicle with a manipulator for police

Automobile Factory "Chaika-Service" published a special truck with crane for private security Russian Ministry of Internal Affairs. 

New assistant to the Russian police will vysokoprohodimy and unpretentious GAZ-33088 "charge" with two-row cabin, and a loader crane Amco Veba 105 2s. Domestic truck is suitable for all driving conditions.

Equipment will be used for household needs police, transportation equipment, its loading and unloading by CMU.

Model Amco Veba 105 2s has two telescopic boom.

Features Amco Veba 105 2s:

Capacity at maximum radius — 715 kg;

maximum

Continue reading AZ Chaika-Service issued a motor vehicle with a manipulator for police

High presentation at the Chaika-Service

"Chaika-Service"

Automobile Factory "Chaika-Service" (Nizhny Novgorod) presented a new model of the telescopic lift installed on KAMAZ-65201. The height to which the lift cradle rises, reaches 54 meters.

For Russia — an absolute record, yet no one domestic company is not created until now none of that. See report from the scene.

"Chaika-Service"

Car media represented the Director General of Ganin Evgeni.

"Chaika-Service"

Italian firm Socage lift mechanism mounted on the domestic chassis KAMAZ-65201. Model Socage TJJ54 is a telescopic aerial work jib. This mechanism is intended for installation on the vehicle chassis with a

Continue reading High presentation at the Chaika-Service

Chaika-Service introduced new models

GAZ-33081 "Sadko" with the crane Amco Veba 105 2s

Factory "Chaika-Service" produced another practical and reliable two-row side GAZ-33081 "Sadko" with the Italian loader crane Amco Veba 105 2s.

Features of hydraulic manipulator:

• Capacity at maximum radius — 715 kg; • Maximum boom — 5.7 meters; • Capacity at the minimum radius — 1270 kg; • Minimum flight — 3.28 meters;

This car will not only transport the cargo, but also plunge into the board, and then unload it. This means that not what attract additional labor, thus saving time

Continue reading Chaika-Service introduced new models

The car Taiga was published

Thanks AZ "Chaika-Service" and domestic cars evolve and become interesting for buyers. For example, once the refinery project, called "Taiga", will join the lineup of domestic chassis. "Taiga" — a new all-wheel drive car based on the GAZ-33081 "Sadko" with two-row 7-passenger cab. The project is unique in its kind and is unparalleled. New GAZ-33081 "Taiga" stands out its militant appearance against cars of its class. In a new series of automobile factory "Chaika-Service" managed to combine modern aerodynamics to achieve recognizable style with elements of American tractors. It will be appreciated that to achieve streamlining in models with

Continue reading The car Taiga was published

Chaika-Service issued autohydraulic Socage DA324 on KAMAZ-4308

Automobile Factory "Chaika-Service" issued aerial Russian-Italian production combined telescopic Socage DA324 on KAMAZ-4308.

Car lift KAMAZ-4308 has good maneuverability, not only in urban areas but also on impassable roads, for example, in the countryside.

For an aerial work platform is characterized by the following indicators: Lifting height — 24 meters, the maximum flight — 11 meters, load cradle — 250 kg.

Combined telescopic boom allows for vertical lift with a pantograph, followed by a horizontal boom extension or the desired angle.

This design feature is common to all models of the series DA. Knee aerial platform with

Continue reading Chaika-Service issued autohydraulic Socage DA324 on KAMAZ-4308

The car factory Chaika-Service issued tractor on GAZ-33104 Valdai a semi-trailer

Automobile Factory "Chaika-Service" issued tractor on GAZ-33104 "Valdai" a semi-trailer. To achieve greater capacity, the platform made of aluminum. On the semi-mounted pneumatic brake actuator with ABS. Length of the semi-trailer — 11 meters. Length of the entire train — 14.6 meters. 

Semi-trailer with side due to the high mobility can be used to transport goods in the suburbs and in cities. Semitrailer possible to install an awning up to 2.2 m For the "Valdai" developed two types of semi-trailers: 7.5 and 11 meters.

 

 

Continue reading The car factory Chaika-Service issued tractor on GAZ-33104 Valdai a semi-trailer

SQL - 16 | 0,989 сек. | 7.27 МБ