JSC MMK has completed the construction of the metallurgical complex MMK-ATAKAS

July 15

Magnitogorsk Iron and Steel Works (MMK) announces the commissioning of a continuous hot-dip galvanizing (ANGTS) at the production site MMK-Atakas in Istanbul (Turkey). ANGTS launch marks the completion of the metallurgical complex MMK-Atakas, erected at two sites — in Iskenderun and Istanbul. Construction of the complex in Iskenderun was completed in the spring of 2011

The design capacity of ANGTS in Istanbul is 450 thousand tons of galvanized steel a year. Production units will be available to consumers, as well as used as a tackle for a further production line coating line with capacity of 200

Continue reading JSC MMK has completed the construction of the metallurgical complex MMK-ATAKAS

On the ELSIB was put into operation winders Selekta 245

As part of the modernization of the winding insulation-of NPO "ELSIB" of work was put into winders model Selekta 245. Equipment purchased under the Investment Company program.

The machine performs an operation such as winding boats. Permission equipment universally by its characteristics: the installation can wind pumps up to 3 m, thus covering the entire range of products NGOs "ELSIB" JSC.

Commissioning of the winding installation — one of a set of measures to modernize the production of insulating and winding. As part of the investment program were also purchased for the press molding slot

Continue reading On the ELSIB was put into operation winders Selekta 245

ELEKS medical device company helps to reduce the time the survey

patient

ELEKS developed a library of specialized functions to run very fast and efficient MR image reconstruction and SVD processing using NVIDIA ® CUDA ™.

  Now these operations are less than a second, compared to 28 seconds for the FFT and 18.5 seconds for the treatment of SVD (more sets of test data using a single-threaded CPU reference implementation). And the maximum achieved SVD 155x acceleration in the original data set of 96 frames acquired 512×384 with 8 coils in the orientation of the YZ. SOLUTION OVERVIEW

Parallel 2D and 3D inverse FFT on the

Continue reading ELEKS medical device company helps to reduce the time the survey

Made 1st Russian conductor PCB layout

 

As you know, one of the distinguishing features of the ITER Project is its multinational and as a result, a broad distribution of responsibilities among all the participants. At the beginning of February 2013 Italian company CRYOTEC completed production of the first copper conductor layout for the poloidal field coils PF1 made on the basis of earlier Russian cable. These works are carried out by Chivasso under a bilateral agreement between the Agency ITER European Union and Russia.

Made of superconducting niobium-titanium strands (strands are made on Chepetz mechanical plant in Glazov, Udmurtia)

Continue reading Made 1st Russian conductor PCB layout

New wagons for Hayroll CherMK

Cherepovets Steel Mill, one of the largest integrated steel mill in the world (part of the Division "Severstal Russian Steel") joins its own fleet of platforms for cold rolled coils 184 with two new Hayroll.

The decision on the purchase of specific platforms was made in order to ensure the absolute safety of cold-rolled steel in transit. As a supplier has been selected JSC "metal factory", Engels, Saratov region, which, according to the contract, in 2012, should put CherMK 380 platforms worth more than 1 billion rubles.

"From April to present" Plant Metal "has put 184 platform, so

Continue reading New wagons for Hayroll CherMK

JSC MMK has completed the construction of the metallurgical complex MMK-ATAKAS

July 15

Magnitogorsk Iron and Steel Works (MMK) announces the commissioning of a continuous hot-dip galvanizing (ANGTS) at the production site MMK-Atakas in Istanbul (Turkey). ANGTS launch marks the completion of the metallurgical complex MMK-Atakas, erected at two sites — in Iskenderun and Istanbul. Construction of the complex in Iskenderun was completed in the spring of 2011

The design capacity of ANGTS in Istanbul is 450 thousand tons of galvanized steel a year. Production units will be available to consumers, as well as used as a tackle for a further production line coating line with capacity of 200

Continue reading JSC MMK has completed the construction of the metallurgical complex MMK-ATAKAS

New wagons for Hayroll CherMK

Cherepovets Steel Mill, one of the largest integrated steel mill in the world (part of the Division "Severstal Russian Steel") joins its own fleet of platforms for cold rolled coils 184 with two new Hayroll.

The decision on the purchase of specific platforms was made in order to ensure the absolute safety of cold-rolled steel in transit. As a supplier has been selected JSC "metal factory", Engels, Saratov region, which, according to the contract, in 2012, should put CherMK 380 platforms worth more than 1 billion rubles.

"From April to present" Plant Metal "has put 184 platform, so

Continue reading New wagons for Hayroll CherMK

On the ELSIB was put into operation winders Selekta 245

As part of the modernization of the winding insulation-of NPO "ELSIB" of work was put into winders model Selekta 245. Equipment purchased under the Investment Company program.

The machine performs an operation such as winding boats. Permission equipment universally by its characteristics: the installation can wind pumps up to 3 m, thus covering the entire range of products NGOs "ELSIB" JSC.

Commissioning of the winding installation — one of a set of measures to modernize the production of insulating and winding. As part of the investment program were also purchased for the press molding slot

Continue reading On the ELSIB was put into operation winders Selekta 245

Ring Tesla (Tesla Coils). Step by step instructions to create a home

Excellent video recommended Yuri yesterday on the topic: Ring Tesla (Tesla Coils). In it, using acrylic and disassemble the unit, enthusiasts gathered this setting. All stages of manufacture and assembly are shown, and the calculations are recorded. I am sure that in spite of the fact that the video is in English, Koreans will be able to replicate this masterpiece. Happy viewing to all who just wondering

(1488)

Continue reading Ring Tesla (Tesla Coils). Step by step instructions to create a home

Made 1st Russian conductor PCB layout

As you know, one of the distinguishing features of the ITER Project is its multinational and as a result, a broad distribution of responsibilities among all the participants. At the beginning of February 2013 Italian company CRYOTEC completed production of the first copper conductor layout for the poloidal field coils PF1 made on the basis of earlier Russian cable. These works are carried out by Chivasso under a bilateral agreement between the Agency ITER European Union and Russia.

Made of superconducting niobium-titanium strands (strands are made on Chepetz mechanical plant in Glazov, Udmurtia) cable was in

Continue reading Made 1st Russian conductor PCB layout

  • Page 1 of 2
  • 1
  • 2
  • >
SQL - 18 | 0,648 сек. | 7.11 МБ