Calendar

Август 2018
MTWTFSS
« Dec  
 12345
6789101112
13141516171819
20212223242526
2728293031 

Russian scientists have learned to bake heavy-duty nanoreztsy

Unusual imaging technology for the treatment of heavy-duty cutters metal mastered at one of Moscow. The tool becomes so reliable that strength can compete with synthetic diamonds and at times can reduce the time for processing of metal parts.

"In order to process the white iron carbide previously used. The time it took day or even two. When using our plates time is reduced to a few dozen minutes, "- told RIA Novosti director Sergei book production.

Technology for creating cutting edge begins with the synthesis of powder — CBN. In appearance it resembles powdered

Continue reading Russian scientists have learned to bake heavy-duty nanoreztsy

NGO Parallel manufactured induction setting for seaside

aircraft manufacturers

By order of "Arsenyev Aviation Company" Progress "to them. Sazykina NI" in the NGO "Parallel" is made induction unit PARALLEL FE-63-22, 0/66, 0. It includes:

inverter PARALLEL CFR-63-22, 0/66, 0 on IGBT-modules with built-in matching transformer and the compensating capacitor dual-circuit cooling station PARALLEL CO-20, set of replacement inductors soldering carbide cutting tools (cutters, milling cutters, drills) pedal control the heating, desktop plumber, The device for connecting to the exhaust ventilation system.

Besides brazing installation can be used for heating or leave the hardening and under plastic deformation. After the factory test the product is

Continue reading NGO Parallel manufactured induction setting for seaside

VIRIAL company began production of a new type of product

VIRIAL company started production of a new type of product — solid carbide milling cutters. Tests of experimental batches mills were successfully completed in the Udmurt Republic.

The use of milling cutters made of hard alloys of VIRIAL in processing the shaft pumping equipment can increase tool life by 2.7 times and reduce production costs.

According to test results signed serial deliveries of products.

In "VIRIAL" (St. Petersburg) provide a complete production cycle of the product was of nanostructured ceramic and metal materials ranging from synthetic raw components to control the quality of the final products.

Continue reading VIRIAL company began production of a new type of product

Russian scientists have learned how to bake heavy-duty nanoreztsy

Unusual imaging technology for the treatment of heavy-duty cutters metal mastered at one of Moscow. The tool becomes so reliable that strength can compete with synthetic diamonds and at times can reduce the time for processing of metal parts.

"In order to process the white iron carbide previously used. The time it took day or even two. When using our plates time is reduced to a few dozen minutes, "- told RIA Novosti director Sergei book production.

Technology for creating cutting edge begins with the synthesis of powder — CBN. In appearance it resembles powdered

Continue reading Russian scientists have learned how to bake heavy-duty nanoreztsy

NGO Parallel manufactured induction unit for maritime aircraft manufacturers

By order of "Arsenyev Aviation Company" Progress "to them. Sazykina NI" in the NGO "Parallel" is made induction unit PARALLEL FE-63-22, 0/66, 0. It includes:

inverter PARALLEL CFR-63-22, 0/66, 0 on IGBT-modules with built-in matching transformer and the compensating capacitor dual-circuit cooling station PARALLEL CO-20, set of replacement inductors soldering carbide cutting tools (cutters, milling cutters, drills) pedal control the heating, desktop plumber, The device for connecting to the exhaust ventilation system.

Besides brazing installation can be used for heating or leave the hardening and under plastic deformation. After the factory test the product is shipped

Continue reading NGO Parallel manufactured induction unit for maritime aircraft manufacturers

Company VIRIAL began production of a new type of product

VIRIAL company started production of a new type of product — solid carbide milling cutters. Tests of experimental batches mills were successfully completed in the Udmurt Republic.

The use of milling cutters made of hard alloys of VIRIAL in processing the shaft pumping equipment can increase tool life by 2.7 times and reduce production costs.

According to test results signed serial deliveries of products.

In "VIRIAL" (St. Petersburg) provide a complete production cycle of the product was of nanostructured ceramic and metal materials ranging from synthetic raw components to control the quality of the final products.

Continue reading Company VIRIAL began production of a new type of product

Prices for universal milling machines and cutters for engraving.

Types of cutters

Milling is the process of different materials using cutters. On the proper selection of the tool depends on the result of: the quality of the product and the amount spent on production time and labor. Omnimil machine can work with different materials and used in a variety of industries. Therefore cutters are considered an indispensable tool.

Depending on the purpose for which made or that mill, a product can be cylindrical, end, end, cutting, disk, slots, special end, shaped or angled. Each of these mills is not only used to achieve different goals, but different from other

Continue reading Prices for universal milling machines and cutters for engraving.

SQL - 8 | 0,866 сек. | 8.18 МБ