EMSS will manufacture products for the Novosibirsk NGO ELSIB

PJSC "EMSS" received an order from the Scientific and Production Association "ELSIB" for the manufacture of products of a total weight of 147 tons EMSS produce billets of two turbine rotors and hydraulic generator shaft.

 

After machining forgings will be sent to the customer in January 2014.

NGO "ELSIB" JSC — Russian engineering company specializing in the design and production of induction motors, hydro generators, turbine generators and frequency converters.

Turbine generator TVF-63M-2U3 sent to Barnaul

September 21 NGO "ELSIB" JSC held a shipment of turbine generator TVF-63M-2U3 for 8 block Barnaul HPP-2. The rotor has been sent to the customer of "Sibirenergoengineering" still on September 18.

This is the first delivery of the Novosibirsk plant in Barnaul HPP-2 — one of the largest thermal power station of the city, provides electricity and heat to its central part. As part of the modernization project TEC-2 in March 2013. planned to supply a few NGOs production of turbine generators "ELSIB" JSC. The modernization program will affect 8 block Barnaul HPP-2.

Turbine generator TVF-63M-2U3

Continue reading Turbine generator TVF-63M-2U3 sent to Barnaul

On the ELSIB was put into operation winders Selekta 245

As part of the modernization of the winding insulation-of NPO "ELSIB" of work was put into winders model Selekta 245. Equipment purchased under the Investment Company program.

The machine performs an operation such as winding boats. Permission equipment universally by its characteristics: the installation can wind pumps up to 3 m, thus covering the entire range of products NGOs "ELSIB" JSC.

Commissioning of the winding installation — one of a set of measures to modernize the production of insulating and winding. As part of the investment program were also purchased for the press molding slot

Continue reading On the ELSIB was put into operation winders Selekta 245

EMSS will manufacture products for the Novosibirsk NGO ELSIB

PJSC "EMSS" received an order from the Scientific and Production Association "ELSIB" for the manufacture of products of a total weight of 147 tons EMSS produce billets of two turbine rotors and hydraulic generator shaft.

 

After machining forgings will be sent to the customer in January 2014.

NGO "ELSIB" JSC — Russian engineering company specializing in the design and production of induction motors, hydro generators, turbine generators and frequency converters.

NGO ELSIB effect shipment of the stator TF-125-2U3 for the Kirov CHPP-4

At the NGO "ELSIB" JSC (Novosibirsk) took shipment of the stator TF-125-2U3 on the launch complex number 2 of the Kirov CHPP-4. The most difficult part of the generator and the oversized capacity of 125 MW and a weight of 140 tons was first shipped by our company using vehicles.

This is the second delivery of the Novosibirsk plant in Kirov CHPP-4 (Kirov branch of TGC-5) in the framework of the investment project to install new equipment and increase the plant capacity from 320 to 345 MW. Recall that in May this year at the launch complex

Continue reading NGO ELSIB effect shipment of the stator TF-125-2U3 for the Kirov CHPP-4

In Kazakhstan, Ust-Kamenogorsk hydroelectric power plant launched a new Russian-made

Ust-Kamenogorsk in Kazakhstan plant began operating hydroelectric, which included — the new hydro production NGO "Elsib".

Start the machine marked the completion of the investment project "AES Ust-Kamenogorsk GES", which involved the renovation of a hydroelectric generator replacement, replacement of electric machine with thyristor excitation system, installation of the automatic control unit. The project also carried out major repairs of hydraulic turbine equipment on hydraulic unit number 1.

For the realization of the investment project at the NGO "Elsib" was produced hydro type SV 1160/180-72 (Article number 1). The generator is made with an

Continue reading In Kazakhstan, Ust-Kamenogorsk hydroelectric power plant launched a new Russian-made

On Barnaul HPP-2 received production equipment ELSIB JSC (Novosibirsk)

TEC-2 completed the delivery of equipment eighth turbine generator. Its manufacturer engaged in research and production association "ELSIB" JSC, Novosibirsk. Energomashinostroitelyam took about a year to complete the order Power. In the near future will begin assembling unit. Equipment start-up is scheduled for 2013.

Reconstruction of Unit will address two main challenges: increase the capacity of the turbine from 55 to 60 MW with the issuance of additional kilowatt-hours of consumers and improve the overall reliability of the second thermal power plant capital of the Altai region.

Turbine generator TVF-63M-2U3 sent to Barnaul

September 21 NGO "ELSIB" JSC held a shipment of turbine generator TVF-63M-2U3 for 8 block Barnaul HPP-2. The rotor has been sent to the customer of "Sibirenergoengineering" still on September 18.

This is the first delivery of the Novosibirsk plant in Barnaul HPP-2 — one of the largest thermal power station of the city, provides electricity and heat to its central part. As part of the modernization project TEC-2 in March 2013. planned to supply a few NGOs production of turbine generators "ELSIB" JSC. The modernization program will affect 8 block Barnaul HPP-2.

Turbine generator TVF-63M-2U3

Continue reading Turbine generator TVF-63M-2U3 sent to Barnaul

Turbine generator TVF-63M-2U3 sent to Barnaul

September 21 NGO "ELSIB" JSC held a shipment of turbine generator TVF-63M-2U3 for 8 block Barnaul HPP-2. The rotor has been sent to the customer of "Sibirenergoengineering" still on September 18.

This is the first delivery of the Novosibirsk plant in Barnaul HPP-2 — one of the largest thermal power station of the city, provides electricity and heat to its central part. As part of the modernization project TEC-2 in March 2013. planned to supply a few NGOs production of turbine generators "ELSIB" JSC. The modernization program will affect 8 block Barnaul HPP-2.

Turbine generator TVF-63M-2U3

Continue reading Turbine generator TVF-63M-2U3 sent to Barnaul

ELSIB sent a huge turbine generator at the Izhevsk CHPP-1

In mid-August, for the needs of "Izhevsk branch on the implementation of investment and priority projects" in Izhevsk CHPP number 1 was sent to one of the parts of the turbine generator TF-80-2U3, namely the stator itself.

The rotor of this powerful turbine generator was sent to Izhevsk in early August, he then became one of the first deliveries of production Novosibirsk plant "ELSIB", at the Izhevsk CHPP number 1.

As part of the project "Reconstruction of Izhevsk CHPP number 1" back in April of this year, started the construction of the newest unit, which in itself implies a

Continue reading ELSIB sent a huge turbine generator at the Izhevsk CHPP-1

  • Page 1 of 2
  • 1
  • 2
  • >
SQL - 16 | 0,589 сек. | 7.15 МБ