TUNING THE SUZUKI RGV250

Continuing the series of articles on two-stroke tuning, this month is the turn of the RGV250. As you know the Suzuki RGV and the Aprilia RS250 share the same engine so it applies to the RS as well.

Next month will be about tuning the Suzuki RG500 because I won’t be doing anything else this month — a customer has delivered 20 RG500 engines to overhaul and tune. Yes 20.

Any dimensions of ports I give will be in mm measured from the top face of the barrel and widths will be as measured simply across using a caliper or

Continue reading TUNING THE SUZUKI RGV250

CMP reconstructed furnace gas cleaning in EAF-2

Chelyabinsk November 3 "Chelyabinsk Metallurgical Plant" (CMP included in the company "Mechel") has revolutionized the gas exhaust tract arc furnace at the electric shop N2 (MSP-2) with the installation of a new pyleosaditelnoy cameras, the press service of the plant.

 Photo source:uralpress.ru

Pyleosaditelnaya camera is installed in addition to the existing gas exhaust ducts, which will reduce emissions of the furnace shop 3 times.

Enter the camera will keep the high efficiency gas cleaning waste gases, extend the turnaround time of its operation. The new camera also peleosaditelnoy improved scheme of gas and dust extraction provides

Continue reading CMP reconstructed furnace gas cleaning in EAF-2

London pollution reached record levels

Pollution has reached record levels in London Facts

Beginning in 2008, in the northern part of England and France, there is a concentration of exhaust gases and dust make a record high air pollution.

Photo: Smog over the central area of London in April 2011.

On March 15, 2012, air pollution in London has exceeded all performance. There are several reasons: during windless weather dusty air flow in combination with the exhaust gases are most obvious in the big cities like New York and Leeds. Windless weather means that the exhaust gases from cars and trucks did not take, mixed

Continue reading London pollution reached record levels

Specialists of Plakart performed spraying heat-resistant coating on the exhaust shaft GPA of OAO Gazprom

On one of the compressor stations of LLC "Gazprom Transgaz" specialists of CJSC "Plakart" works on application of combined heat-resistant corrosion-resistant aluminum-containing coating "Spramet" on the exhaust shaft pumping unit.

Work was carried out with the forests at an altitude of 32 meters above the ground. The works were made in the station of "Gazprom" in a short time during the current GPA and repair without dismantling the chimney.

 Photo source:plackart.com

Pipe GPA coated Spramet

Metal chimneys and exhaust shafts boilers and gas pumping units (GPU) are very difficult to protect the paint or polymer compositions:

Continue reading Specialists of Plakart performed spraying heat-resistant coating on the exhaust shaft GPA of OAO Gazprom

Creates a new chassis KrAZ ZERNOVOZNOGO EQUIPMENT FOR THE INSTALLATION

"KrAZ" manufacturer new car chassis KrAZ-6511 (6×4) continued the development of a promising line of vehicles with mounting as "cab-over-engine."

This car chassis specialists adapted licensed cab MAN F-2000. She has good ergonomics of the driver: a comfortable seat with air suspension, adjustable in height and angle steering column, functional instrument panel provides the driver with maximum comfort while working.

 

Besides the KrAZ-6511 is equipped with a 6 — cylinder in-line diesel engine Weichai Power environmental class Euro 4, with the potential to support the Euro-5. 400-horsepower engine has a capacity of

Continue reading Creates a new chassis KrAZ ZERNOVOZNOGO EQUIPMENT FOR THE INSTALLATION

Specialists of Plakart performed spraying heat-resistant coating on the exhaust shaft GPA of OAO Gazprom

On one of the compressor stations of LLC "Gazprom Transgaz" specialists of CJSC "Plakart" works on application of combined heat-resistant corrosion-resistant aluminum-containing coating "Spramet" on the exhaust shaft pumping unit.

Work was carried out with the forests at an altitude of 32 meters above the ground. The works were made in the station of "Gazprom" in a short time during the current GPA and repair without dismantling the chimney.

 Photo source:plackart.com

Pipe GPA coated Spramet

Metal chimneys and exhaust shafts boilers and gas pumping units (GPU) are very difficult to protect the paint or polymer compositions:

Continue reading Specialists of Plakart performed spraying heat-resistant coating on the exhaust shaft GPA of OAO Gazprom

CMP reconstructed furnace gas cleaning in EAF-2

Chelyabinsk November 3 "Chelyabinsk Metallurgical Plant" (CMP included in the company "Mechel") has revolutionized the gas exhaust tract arc furnace at the electric shop N2 (MSP-2) with the installation of a new pyleosaditelnoy cameras, the press service of the plant.

 Photo source:uralpress.ru

Pyleosaditelnaya camera is installed in addition to the existing gas exhaust ducts, which will reduce emissions of the furnace shop 3 times.

Enter the camera will keep the high efficiency gas cleaning waste gases, extend the turnaround time of its operation. The new camera also peleosaditelnoy improved scheme of gas and dust extraction provides

Continue reading CMP reconstructed furnace gas cleaning in EAF-2

Geared to heaven rysachkov

In Research and Production Center Gas Turbine "Salute" conducted development work on a new model of small-sized gas turbine turboprop TV-500S power 630 hp

Interest in small aircraft today is great. Projects — the sea, and also quite enthusiastic. Lacks only one thing — the best of the domestic motor. At present, Russia is not produced turboprop engines of 500 — 700 hp needed for Multi-purpose aircraft. The engine is also required and the usual small aircraft, which is torn to replace the An-2. Such planes already there, you can see them at max. This is

Continue reading Geared to heaven rysachkov

PJSC Dnipropolymermash continues to carry out the order to Zorya — Mashproekt

PJSC "Dnipropolymermash" continues to carry out the order

"Zorya — Mashproekt" producing gas exhaust tracts.

For the past 6 months, our company cooperates with GP NPKZ "Zorya — Mashproekt", in May 2013 to address the customer has already been shipped 4 set path for the gas exhaust turbine power of 35-40 MW dimensions O3800mm. L — 13 920mm. Danae products available in China, Iraq, Iran, Syria. 

In June, planned to produce and ship the five sets of these products. Employees of Marketing negotiate with the

Continue reading PJSC Dnipropolymermash continues to carry out the order to Zorya — Mashproekt

Creates a new chassis KrAZ ZERNOVOZNOGO EQUIPMENT FOR THE INSTALLATION

"KrAZ" manufacturer new car chassis KrAZ-6511 (6×4) continued the development of a promising line of vehicles with mounting as "cab-over-engine."

This car chassis specialists adapted licensed cab MAN F-2000. She has good ergonomics of the driver: a comfortable seat with air suspension, adjustable in height and angle steering column, functional instrument panel provides the driver with maximum comfort while working.

Besides the KrAZ-6511 is equipped with a 6 — cylinder in-line diesel engine Weichai Power environmental class Euro 4, with the potential to support the Euro-5. 400-horsepower engine has a capacity of 11.596 liters and

Continue reading Creates a new chassis KrAZ ZERNOVOZNOGO EQUIPMENT FOR THE INSTALLATION

SQL - 16 | 0,628 сек. | 7.26 МБ