Calendar

Август 2018
MTWTFSS
« Dec  
 12345
6789101112
13141516171819
20212223242526
2728293031 

The Big Dipper.

Let’s take a closer look at one of the most easily recognisable patterns of stars in the northern hemisphere.

The Big Dipper goes by several different names, including the ‘Plough’ and the ‘Saucepan’. It is, though, very recognisable with its bowl-shaped pattern of four stars connected to a ‘handle’ of three more. This is a group of stars which has been recognised from time immemorial and by nearly all cultures around the world.

It is not a constellation in its own right, but just an easy-to-spot pattern of stars which form part of the larger constellation of Ursa Major, or

Continue reading The Big Dipper.

It is very comfortable

Cover with canned in glass jars are usually removed so that they become unsuitable for reuse whatever they straighten. We propose to improve the manual capping machine so that it does not just roll up, but gently to open cans.

Covers captured a machine, no need to rectify, — they can be used again. It is easy to straighten out before removing the cover.

With the machine should be removed from the rolling drum roller, and in its place to carve a movable pad 1. Instead of the screw head of the drum need to carve lamb bolt 2 (it

Continue reading It is very comfortable

Lather letter opener

For Starters, Prepare the Blank

1. Select a 1 1/2Xl 1/2X12 blank. (We tried both walnut and curly maple.) Then, draw diagonal lines at each end to locate the center. On the end of the stock that will be the blade, draw a line through the center point perpendicular to the grain. (For reference, see the Blank Preparation drawing on page 26.) Now, use a bevel gauge to transfer this line to the other end of the blank. (Note: Aligning the offset centers perpendicular to the grain ensures that the face grain will be aligned with the faces of the

Continue reading Lather letter opener

Dmitri Popov

FEATURES

NATIONAL X

HUNTING

KNIVES

There is an old hunting test: sharpening a hunting knife should last a minimum of «roughing» a wild boar or elk — without the need for changes.

About hunters and knives

Lunch on ohotbaze held in high spirits — with jokes, toasts, «the field» and hearty snack. Some of those in the early morning of the guard in an ambush, had returned to prey: a shot of Gusak, as if by chance, were modestly exposed for all to see, and proud prey lucky accepted congratulations.

«Andrei, drag another zakus while preparing hot!» One of

Continue reading Dmitri Popov

Bandsawn Basket

Baskets come in all shapes and sizes, and they are made of many different materials. This one is truly unique-it collapses flat for storing and is quite a conversation piece.

Choose a straight—grained, knot—free piece of hardwood that’s about 3/4″ X 7″ X 13″. Sand the top and bottom surfaces.

Start by laying out the pattern. Draw a straight line horizontally across the middle of a large piece of paper, and another line at the center of the first running 90° to it. Where the two lines intersect: measure 3″ in both directions along the horizontal line and make a

Continue reading Bandsawn Basket

Uralmashplant (Ekaterinburg) is upgrading production

February 18, 2013 at JSC "Uralmashplant" was put into operation and the third largest Italian company RAMA machine cost a quarter billion rubles.Gantry machining center is designed to handle large equipment for the metallurgical and mining industries.

The machine frame — not the only one who appeared in the production. Two more Frame, smaller, are already in place since 2012, and currently there is an installation of the South Korean carousel turning and machining center Henkuk.

In the coming years, major investment in a deep modernization of the plant will be

Continue reading Uralmashplant (Ekaterinburg) is upgrading production

Millennial Novgorod bowl restored in Hermitage

It took nearly three months of the masters of the State Hermitage Museum to refurbish trehkilogrammovy kratir (chalice for communion), made of silver at the end of XI century Constantin Costa-master for the Cathedral of St. Sophia Novgorod Kremlin. 

Past nearly ten centuries spared a masterpiece of ancient casting stamping and carving. Bowl a few deformities, severe damage appeared to handle kratira and gilding, any cracks, traces of rations, oxides and dirt.

Scientists Hermitage not only managed to restore the original appearance kratira — remove tin solder oxides stain and strain to laser soldering

Continue reading Millennial Novgorod bowl restored in Hermitage

Millennial Novgorod bowl restored in Hermitage

It took nearly three months of the masters of the State Hermitage Museum to refurbish trehkilogrammovy kratir (chalice for communion), made of silver at the end of XI century Constantin Costa-master for the Cathedral of St. Sophia Novgorod Kremlin. 

Past nearly ten centuries spared a masterpiece of ancient casting stamping and carving. Bowl a few deformities, severe damage appeared to handle kratira and gilding, any cracks, traces of rations, oxides and dirt.

Scientists Hermitage not only managed to restore the original appearance kratira — remove tin solder oxides stain and strain to laser soldering

Continue reading Millennial Novgorod bowl restored in Hermitage

LTD MH Tonar (Moscow region). Developed dumper

This year, the Ministry of Health, LLC "Tonar" developed dumper TONAR-4525 End Dump

Brief specifications

Body capacity — 25 cubic meters Load capacity — 45 t Net weight — 22 t Engine WEICHAI WD 12.375 Engine output 375 hp The maximum torque of 1500 Nm Transmission 9JSD180 9 forward, 1 — back. Wheelbase 1450 mm 3650 + 6×4 14R24 tires The front bar HANDLE 13T Rear Axle HANDLE 25T Manual Transmission The gear ratio rear axle 12.87 The maximum speed of 41 km /

(function (w, doc) { if (!w.__utlWdgt) { w.__utlWdgt = true;

Continue reading LTD MH Tonar (Moscow region). Developed dumper

Uralmashplant (Ekaterinburg) is upgrading production

February 18, 2013 at JSC "Uralmashplant" was put into operation and the third largest Italian company RAMA machine cost a quarter billion rubles.Gantry machining center is designed to handle large equipment for the metallurgical and mining industries.

The machine frame — not the only one who appeared in the production. Two more Frame, smaller, are already in place since 2012, and currently there is an installation of the South Korean carousel turning and machining center Henkuk.

In the coming years, major investment in a deep modernization of the plant will be

Continue reading Uralmashplant (Ekaterinburg) is upgrading production

SQL - 8 | 1,042 сек. | 8.39 МБ