Calendar

Август 2018
MTWTFSS
« Dec  
 12345
6789101112
13141516171819
20212223242526
2728293031 

On lathes CAN NAVIT SPRING length with a train, and if you want, and length. And it besides can be «RAZNODIAMETROVOI.»

Springs art historians for some reason not listed among the great inventions, such as a hammer wheel, gunpowder and paper. The technique of the spring came quietly, and now there without any mechanism — from hours to walking excavator. Such giants of mechanical engineering, as Moscow ZIL or «Rostselmash», making tens of millions a year in spring. There are vending machines, they just shoot springs: small-hundreds of pieces per minute, with a diameter larger-tens. But when the springs need a little and keep the machine is unprofitable, have to spend tens of minutes to manufacture one spring.

According to current

Continue reading On lathes CAN NAVIT SPRING length with a train, and if you want, and length. And it besides can be «RAZNODIAMETROVOI.»

EMSS upgrades machining process

On Energomashspetsstal (EMSS) (part of the group of companies "Atomenergomash") commissioned a new roll-turning lathe "Hercules", which will handle the details of rotation of up to 300 tons. In addition to carrying capacity, this unique German lathe and milling machine makes the presence of a grinding tool.

 Photo source:rosatom.ru

Before installing the machine German company "Hercules" model lathe with the largest capacity in the Energomashspetsstal was KZH16165 capacity of 250 tons. The benefits of "Hercules" can also be attributed to its accuracy. When processing of the items can achieve accuracy up to 0.01 mm in the diameter of

Continue reading EMSS upgrades machining process

Ryazan Machine Tool Works, is increasing production.

Despite the difficulties caused by the crisis, the Ryazan Machine Tool Works increased production volumes, seeking to meet the needs of the customer.

 Photo source:metobr-expo.ru

The plant has developed a new design tools and began mass production of the following models: screw-cutting lathe model 16R50F312-5 (Swing over bed 900 mm, over carriage 660 mm, maximum length 4800 mm); lathe chuck-center model 1715EK1 (Swing over bed 320 mm, over carriage 250 mm, maximum length 500 mm); vertical CNC machining center models GF5171MEK6 designed for multistage processing of various parts of complex configuration (table size 1300 x 600 mm)

Continue reading Ryazan Machine Tool Works, is increasing production.

Ryazan Machine Tool Works, is increasing production.

Despite the difficulties caused by the crisis, the Ryazan Machine Tool Works increased production volumes, seeking to meet the needs of the customer.

 Photo source:metobr-expo.ru

The plant has developed a new design tools and began mass production of the following models: screw-cutting lathe model 16R50F312-5 (Swing over bed 900 mm, over carriage 660 mm, maximum length 4800 mm); lathe chuck-center model 1715EK1 (Swing over bed 320 mm, over carriage 250 mm, maximum length 500 mm); vertical CNC machining center models GF5171MEK6 designed for multistage processing of various parts of complex configuration (table size 1300 x 600 mm)

Continue reading Ryazan Machine Tool Works, is increasing production.

On OMZ Special Steels (St. Petersburg) commissioned a new lathe

The enterprise OMZ-Special Steels, part of OMZ Group, entered into trial operation a new lathe-type SR 4 — 330/20m production company Skoda Machine Tool (Czech Republic) for workpieces weighing up to 250 tons.

Modern lathe will allow for finishing machining workpieces, providing the necessary approvals, in full compliance with the requirements of the customers. On the new machine is expected to handle shafts, rollers and rotor weighing up to 250 tons and a length of 20 meters. Thus, the commissioning of the new equipment will increase the share produced by the company with machining workpieces.

The total cost of the

Continue reading On OMZ Special Steels (St. Petersburg) commissioned a new lathe

At CTZ continued implementation of high-precision equipment

At CTZ collected two and one machining CNC lathe Czech production.

In the production of advanced technologies Chelyabinsk Tractor Plant ("CTP-URALTRAC") collected two and one machining CNC lathe. The press-service of the company. Equipment is manufactured by the Czech company Kovosvit MAS.

One of the machines working since the beginning of October, the other two will be launched within a week. Their technical adjustment will be made by specialists from the Czech Republic.

First machines Kovosvit MAS predict CTZ last year. In today — took delivery of eight Machining Complex. This equipment is intended for the manufacture of precision

Continue reading At CTZ continued implementation of high-precision equipment

At EMSS commissioned a new roll-turning lathe Hercules

Commissioned a new roll-turning lathe "Hercules", which will handle the details of rotation of up to 300 tons.

In addition to carrying capacity, this unique German lathe and milling machine makes the presence of a grinding tool.

The development of the foundry and steel production puts new demands on the important stage of the process — machining process, which must constantly improve the system control machine tools, to improve the accuracy rate of all types of handling and performance.

"EMSS" positions itself in the market as a balanced enterprise technology cycle, from raw material processing, smelting steel ingot production

Continue reading At EMSS commissioned a new roll-turning lathe Hercules

At the Orsk Machine Building Plant (OMZ) commissioned a new CNC lathe

At the Orsk Machine Building Plant (OMZ), which is part of the Pipe Metallurgical Company (TMK), as part of the investment program of the enterprise in mechanical assembly shop number 3 launched a new model SAT630S10F3 lathe with CNC Fanuc.

This is the second machine, the firm acquired OMZ "SASTA" — Russian manufacturer of precision turning machines. The new machine is designed for finishing and threading for casing pipe couplings "Premium".

The new machines are equipped with automatic indexing chuck with hydraulic German company Rohm, specially designed for the treatment of oil country tubular joints. Its technical features allow

Continue reading At the Orsk Machine Building Plant (OMZ) commissioned a new CNC lathe

EMSS upgrades machining process

On Energomashspetsstal (EMSS) (part of the group of companies "Atomenergomash") commissioned a new roll-turning lathe "Hercules", which will handle the details of rotation of up to 300 tons. In addition to carrying capacity, this unique German lathe and milling machine makes the presence of a grinding tool.

 Photo source:rosatom.ru

Before installing the machine German company "Hercules" model lathe with the largest capacity in the Energomashspetsstal was KZH16165 capacity of 250 tons. The benefits of "Hercules" can also be attributed to its accuracy. When processing of the items can achieve accuracy up to 0.01 mm in the diameter of

Continue reading EMSS upgrades machining process

At EMSS commissioned a new roll-turning lathe Hercules

Commissioned a new roll-turning lathe "Hercules", which will handle the details of rotation of up to 300 tons.

In addition to carrying capacity, this unique German lathe and milling machine makes the presence of a grinding tool.

The development of the foundry and steel production puts new demands on the important stage of the process — machining process, which must constantly improve the system control machine tools, to improve the accuracy rate of all types of handling and performance.

"EMSS" positions itself in the market as a balanced enterprise technology cycle, from raw material processing, smelting steel ingot production

Continue reading At EMSS commissioned a new roll-turning lathe Hercules

SQL - 8 | 0,980 сек. | 8.38 МБ