Calendar

Октябрь 2018
MTWTFSS
« Dec  
1234567
891011121314
15161718192021
22232425262728
293031 

TITANIUM TAKES THE PRESSURE

Titanium was named after the Titans, a group of powerful and immortal gods in classical mythology. One of their number was Oceanus, who was believed by the Greeks and Romans to be the divine personification of an enormous river that encircled the world on the line of the equator.

It is fitting, therefore, that the cases for the finest diver’s watches are made of this remarkable element, which in its metallic form is resistant to corrosion (especially in salt water) and boasts the highest strength-to-weight ratio of any metal. The striking C11 Titanium Elite Chronometer is the first Christopher Ward

Continue reading TITANIUM TAKES THE PRESSURE

LIGHT DAY

"One step ahead of the rest" — The motto of Seiko and its founder Kintaro Hattori. Following this motto, Seiko, marking 100 years of watchmaking, released a limited collection Kintaro Hattori Astron GPS Solar. Watch through the built miniature GPS-module receives data on the current time and date in any of the 39 s time zone and fed by energy from the built-in solar panel. A total of 5,000 units made, all in the case of titanium with a black

PVD-coated crown and adorned with onyx. Glass with anti-reflective coating and two bracelet: alligator leather and titanium. Went on sale

Continue reading LIGHT DAY

Evaluating the effectiveness of podsmazochnyh coatings and lubricants for cold extrusion of nanocrystalline titanium BT1-0.

For materials with ultrafine structures apply methods of intensive deformation, in particular equal channel angular (ECA) pressing.

This method allows to achieve a high level of mechanical properties of metals and alloys, such as copper, nickel, titanium and other by forming them in nanocrystalline (NC) structure with a grain size of 100-500 nm.

For practical use of NK-materials in various industries, more research is needed technological modes of processing. In this paper we study the tribological parameters of cold extrusion process (reduction) of commercially pure titanium BT1-0 NK with a high level of properties as a promising substitute doped

Continue reading Evaluating the effectiveness of podsmazochnyh coatings and lubricants for cold extrusion of nanocrystalline titanium BT1-0.

Unique for the Russian laboratory on the superplastic forming of metals run in Irkutsk Technical University

 Photo source:megairk.ru

Irkutsk Technical University set up a laboratory "Advanced methods of forming a blank-stamping process", for which the well-known French company "DIA" built on request of the University unique to the Russian equipment superplastic forming, combined with diffusion welding of sheet metal alloys worth 78 million rubles.

This lab will allow the university to carry out work on the creation and testing of new technologies shaping sheet metal parts made of aluminum and titanium alloys for a wide range of engineering products, conduct specialized tests of metals and alloys in superplastic deformation modes, train highly qualified personnel

Continue reading Unique for the Russian laboratory on the superplastic forming of metals run in Irkutsk Technical University

UMPO showed intermetallic high-pressure compressor blades engine for the PAK FA

"Ufa Engine Industrial Association" has demonstrated the first examples of a high-pressure compressor blades promising engine for the PAK FA to show the results of the federal program, which took place on 25-27 April in the "Forum Hall" (Moscow).

All parts are made of a unique way of casting intermetallic compound (an alloy of titanium and aluminum — titanium aluminide). Its advantage is that, while maintaining the strength characteristics of the blade from titanium aluminide much lighter than similar parts made by injection molding technology previously used nickel alloys. This is the result of joint work UMPO and the

Continue reading UMPO showed intermetallic high-pressure compressor blades engine for the PAK FA

Titanium tubes VSMPO of Korean titanium

Corporation "VSMPO" and the South Korean company "Yulchon" agreed to establish a joint production of titanium tubes

Photo from VSMPO titanium Ukraine

Ekaterinburg, October 26. / BUSINESS-TASS /. The world's largest corporation in titanium "VSMPO" and the South Korean company "Yulchon" was signed today in Yekaterinburg memorandum on the establishment of joint production of titanium tubes. According to the briefing, the Director of Legal Affairs "VSPMO-Avisma" Artem Kislichenko, the construction company will begin next year.

"It will be built on the field of titanium in the South Korean province of Gyeonggi-do" — said Kislichenko. —

Continue reading Titanium tubes VSMPO of Korean titanium

Raw materials appendage, you say?

We have already commented on Russian technologies in the global aviation industry. Three leading manufacturer of passenger planes — "Boeing", "Embraer" and Airbus "on 15 percent or more are out of our titanium (here we are just about there.) The same" Dreamliner "- power design titanium. Fact, in the world no one else does anything like this scale. annually "Boeing" buys "VSMPO" 8-10 thousand tons of production by half a billion dollars — for all of their machines. And that's not all. in 48 states titanium products buy monsters — Snecma, General Electric, Rolls Royce, Pratt &Whitney, Goodrich …

Continue reading Raw materials appendage, you say?

Supercomputers at NIU BSU helped in the creation of high ductility titanium

Company "T-Platforms' reported the use of numerical simulations on supercomputers «T-Edge 32" and "Nezhegol" at NIU "BSU" in the creation of new biocompatible nano-crystalline titanium.

"Getting the nanostructured titanium will promote the development of the domestic medical industry and increase its competitiveness in the world market, — says Ivan Nelasov, a researcher at the Research and Education and Innovation Centre" Nanostructured Materials and Nanotechnology "NIU" BSU. " — Today we have been successfully operating company "Metal-deform", supplying blanks for the manufacture of implants of this material on the Kazan Medical Instruments Plant and other enterprises. The company

Continue reading Supercomputers at NIU BSU helped in the creation of high ductility titanium

VSMPO and Boeing are developing cooperation

Ural Boeing Manufacturing (UBM), the Cooperative venture Boeing and VSMPO, delivered the first batch of beams aircraft main landing gear Next-Generation 737.

 Photo source:itar-tass.com

"Production of the main landing gear beams Next-Generation 737 at UBM — this is an important step in a long-term cooperation with Boeing state corporation Russian Technologies / VSMPO, our strategic partner and key supplier in Russia — said Gary Kessler, CEO Ural Boeing Manufacturing. — Our work is aimed at increasing production and production capacity. "

Beam main landing gear aircraft Next-Generation 737 is an integral part of the design of the

Continue reading VSMPO and Boeing are developing cooperation

Boeing plans to spend $ 17 billion for the purchase of titanium parts in Russia

Titanium parts production VSMPO AVISMA

The American company The Boeing Company plans to spend $ 17 billion for the purchase of titanium parts in Russia. In an interview with Russia Today TV channel said president of Boeing Russia / CIS Sergey Kravchenko.

"We are planning the purchase of titanium parts made in Russia, in the amount of 17 billion dollars over the next twenty years", — said Sergey Kravchenko. According to him, "Russia really is the biggest supplier for Boeing».

"We buy the engineering, we buy technology, we develop technology together with Russian scientists, we

Continue reading Boeing plans to spend $ 17 billion for the purchase of titanium parts in Russia

SQL - 8 | 3,676 сек. | 8.42 МБ