Sniper rifle Blaser R93 LRS-2 / Blaser Tactical-2 developed by the German company «Blaser Jagdwaffen GmbH», which is based in the quiet town Isnu in southern Germany. Despite its youth, the company occupies a worthy place in the world in the midst of manufacturers of high quality tools. For amateur hunting is threaded and combination guns, carbines. For law enforcement units and sporting events — and sniper precision (Match) rifles. Pride office «Blaser» are quality rifles and shotguns rifles combined with trunks paired vertical — byuksflinty and Tees — Drilling.
Among them, more is popular with a hunting rifle (carbine) with the sliding bolt R93 series made on the basis of previously produced the SR 950/88. Release of the first motivated Blaser rifle for shooting at a distance of 300 m was started in 1997. After surviving four years a number of constructive (technological configurations, at present this model, designed for sporting purposes and voennyyh (CISM), issued under the name Blaser R93 LRS-2. Main structural elements barrel, bolt and trigger mechanism found a model Blaser R93 its place in the development of the sniper rifle Blaser R93 LRS / UIT-Standart (Match Play mnogokalibernaya rifle), which provides the highest specifications for accuracy. series of holes 10 shots at a distance of 300 m is laid in a circle with a diameter of 28 mm.
The emergence of the light Blaser R93 LRS-2 was a natural result of the development of the upcoming models R93, the development of which have been found successful design solutions shutter assembly with the barrel and their co-location of the receiver. R93 as a hunting system was demonstrated athletes, there was an offer made on the basis of its mnogokalibernuyu sporting rifle for military applied sports. Offer athletes supported the then owner of Blaser sovereign Blake.
Distinctive features of the new model are:
special form of lodges;
more powerful barrel length of 600 or 762 mm with longitudinal ribs;
a trigger force of 1500 g;
detachable magazine capacity of 10 rounds.
In late 1996, was born model R93 Match. It is quite justified hopes athletes hit and accuracy of fire, issuing bullet spreading width of 36 mm at a distance of 300 m, but the work shop and trigger sought refinement. In addition, there were complaints regarding the strength of the stock and forend rifle. There were times when if you hit or fall guns came kink box. The fact that it was cast from lightweight duralumin alloy, and zeal to save on the total weight of the product has resulted in a weakening of the lodges in some places. Analyzing the experience of the implement biennial sports clubs, decided to radically change the design of the rifle. In order to maintain low mass modern rifle box made of glass fiber reinforced polyamide, and load-bearing elements of the receiver milled from aluminum. Desyatizaryadny store was changed to five-shot, a perfect design.
Improvements and touched the trigger. Compared with previous models, the descent was «dry» and more than a little. Spectra were expanded trigger adjustments and reduced the number of parts. All alterations took less than a year, and in 1999 the first reference model Blaser R93 LRS-2 were launched in creation. Thanks to all of the latest innovations on the rifle barrels can be installed heavy duty calibers. This is especially topical for the caliber .338 Lapua Magnum, which is very popular with athletes and snipers and gives them the maximum ability to accomplish goals. On rifles Blaser R93 LRS-2 can installed all kinds of spectacles and optical sights. The design provides for the presence of guns maximum adjustments lodges and trigger. Mass LRS-2 can be attributed to the average in its class.
Rifle Blaser R93 LRS-2 exists in different calibers. To ensure the highest accuracy for each cartridge has its own trunk rifling pitch: .222 Rem./356 mm; .223 Rem./229 mm; .243 Win./254 mm; 6 mm/305 mm; 6 mm/203 mm; H55/220 6.5 mm; H55/270 7.5 mm; .308 Win./280-305 mm, depending on the type of bullet. Deserves special attention gate locking system razrabotanaja company Blaser — for unlocking and locking is not necessary to rotate the bolt that can achieve the highest practical rate of fire and does not change the situation (also not lose target), even for inexperienced shooters. Reloading rifle is simple and silently by longitudinal movement of the shutter by its handle. Cocking the hammer occurs when you move the slider on the shank and the shutter does not ask meaningful effort, with all this reveals a large reddish point, signaling that the gun ready to fire. When moving the slider rod mainspring moves forward and compresses it. Cocked the hammer locks the lever. To remove guns from cocked by pressing down the slide head down and move it back. To remove the bolt you need to translate it into the open position, push the crown stem protruding from the right side of the receiver and reverse movement of the handle to remove it. Trigger mechanism is a separate unit is a lever system that allows it to adjust its efforts on the trigger.
Svobodnovyveshenny ctvol does not rely on the shank and fixed in the receiver in the 2-points, which increases accuracy. Design tools allows you to freely create substitution trunk without following its adjustment. With all of this you should immediately change the shutter head, which is attached to the plug stem. Highest stability, accuracy and reliability of the Sport model Blaser R93 LRS lured attention Governing law enforcement officers who took her into service, with small changes. This rifle was named Blaser R93 CISM / Tactical and is available for cartridges: .243 Win.; 6mm NORMA BR; 7.5 x55 (GR 11), but the main patron, the police used a .308 Win. (7.62 x 51). In accordance with the requirements SISM shop rifle separated only by simultaneously pressing the 2-button latch located on the edges of the polymer lodge.
In the upcoming based rifle Blaser R93 LRS-2 (different from previous models for better polymer quite a bed) at the request of the special forces model was created under .338, with an elongated box Box for longish cartridge with extended barrel and has received the title of Blaser R93 Tactical-2. The difference between 2 and LRS-Tactical-2 dimenzionirovanii receiver. At LRS-2 is compatible with standard stems from R93. At Tactical-2 stems from the chamber diameter 34 mm, at R93-29 mm (.338 differences resulting from the implementation on the rifle Tactical-2). On Blaser R93 Tactical-2 comes standard strap Picatinni / Weaver and barrel thread for muzzle brake, on the box plus additional threaded holes for mounting additional brackets. Corporate «blayzerovsky» bracket to Provide operational separation and joining with guaranteed preservation of sight position of the optical axis.
All models Blaser R93 (LRS / LRS-2 / Tactical / Tactical-2) just get to the main sites for the care and transportation (in this case, the receiver / receiver can not be removed). With the introduction of selected ammunition all models demonstrate accuracy of less than 0.5 MOA.
The advantages of Blaser R93 LRS-2 / Blaser R93 Tactical-2 include the following points:
— Corporate Bleyzerovsky gate with direct course provides the highest practical rate.
— Thanks to a removable barrel depending on the situation, you can use standard cartridges or cartridges oversized class «magnum».
— Changing the barrel is less than 30 seconds.
— Polymer adjustable bed, effort and move the trigger allows for easy adjustment to the arrow.
Sniper rifle Blaser R93 Tactical-2 was adopted by the special forces of Germany, Australia, Iceland, Malaysia, Netherlands, Slovenia, Ukraine, and sports rifle Blaser R93 LRS-2 offered on civilian gun market.
Properties Blaser LRS-2 / Tactical-2
Weight, kg: 5kg
Cartridge: 7.62? 51 mm NATO, .300 Winchester Magnum, .338 Lapua Magnum, 6,5? 55 mm
Mechanisms work: longitudinal rotary bolt
Type of ammunition supply: box magazine for 5 rounds (4 variant chambered for .300 Winchester Magnum)