Connecting a home theater — its just

Connecting a home theater system - it's justAt the current time home cinema ceased to be something exotic, now it can allow yourself to actually does not matter what kind of family. Options for the purchase and assembly of the system is a huge amount, and it sverhtehnologichny system over a high-quality sound and picture, and cinema halls, built-in multi-room system, and the most common system, collected from a cheap set of computer speakers schemes 5.1 and ordinary tele.

Making selection of parts for a movie night, at first, you should find the source of display media. At the current time, this is usually a plasma or LCD panel huge size, or video projector. The main advantage of the latter in front of the plasma panel is that with a high-quality color reproduction it also ensures that there is very great video. It is also seen that the presence of the projector requests the indoor effective shading, why do you need to install lighting control.

After the acquisition of the projector, perform the selection of effective speakers. The range of models on the market is very large, and therefore, the user must conform both your budget and your own preference. It should also be very carefully approach the selection screen. No doubt, like watching movies, TV programs and computer games on display with large diagonal cause unforgettable feelings and memories. But it should be borne in mind that not carefully picked screens cause some violations contrast, color fading, etc. So Makarov, with the simplicity of the installation of home cinema has certain specific features of disposition and certain aspects.

In general, avoid the introduction of paintings in the hall, holding an amplifying factor of .5 and above, and do not use the projector with ultra-short focus. By general rule, the closer to the screen and what further away from the central axis will be projector, the greater the values deviate from the conventional angle of incidence of light at the edge of the screen, and thus a large part of the light will get walls, not the viewers.

Connecting a home theater provides for the best possible placement of the projector in the distance, is at least the width of the two images, and slightly above the center of the screen. So Makar, fully understood that in a home cinema all the components together and interconnected in some way correspond to the same level.

Like this post? Please share to your friends: