PJSC "Black Sea Shipbuilding Plant" (CSY, Nikolaev, Ukraine) on June 4, has completed a comprehensive renovation medium landing ship "Kirovograd" Naval Armed Forces of Ukraine.
As the press service of the CSY, in the course of repair, according to the drawings of Design center of the plant was made a new ramp of the ship and the gate leaf device for receiving and landing. Also repaired two main engines of the ship with the production of new gas lines.
— "After the call KFOR" Kirovograd "in the waters of the plant, the ship was raised by a floating dock on the slipway position. Experts of the plant produced a large amount of case work, in which the replacement of about 40 tons of metal body cladding and tanks "- said the head of the spetssudoremontu bank" Black Sea Shipbuilding Plant "Gennady Chub.
Currently, the updated "Kirovograd" went to sea for sea trials, testing the functioning of mechanisms, motors, as well as technical tools and weapons. In tests of the vessel involved a group of specialists CSY.
— "Nikolaev shipbuilders of a large body of work that gives us the opportunity to continue to use the principle of cyclic operation of the ship. , The average repair ship main engines will use them without restrictions within the next ten years. In addition, the casing of the ship is replaced, repaired ship systems "- summed up the Head of Operation and Repair Command of Naval Forces of Ukraine captain Michael Turner.
As reported previously PJSC "Black Sea Shipbuilding Plant" has successfully repair the three ships of the Ukrainian Navy: missile corvette "Dnieper" special purpose ship "Perejaslav" large landing ship "Konstantin Olshansky."
In May 2012 a tender was held, which resulted in PJSC "CSY" signed a contract with the Ukrainian Navy Command for repairs four ships. In September 2012, the waters of the CSY went KFOR "Kirovograd" to perform complex repairs.
PJSC "Black Sea Shipbuilding Plant" — a shipyard with the highest technical potential in Ukraine. For the construction of ships and vessels displacing up to 105,000 tons of the plant has two inclined slipway "0" and "1". Thread-point production of specialized vessels for mass production to 9000 tons deadweight. Production areas and production line construction vessels located in the same building covered a length of about 400 m of PJSC "CSY" is part of the shipbuilding holding Smart Maritime Group (Ukraine).
Smart Maritime Group (SMG) — the largest shipbuilding holding Ukraine. Founded in 2009 to manage marine economic asset Smart-Holding. SMG brings together two of the largest shipbuilding companies in Ukraine — Black Sea Shipyard and Kherson Shipyard. The structure also includes a port of the sub-holding "Ochakov" (the Dnieper-Bug estuary, Mykolaiv region).