Of timber Red October has launched a new

timber-processing complex

Of "timber" Red October " (Perm) has launched a new timber-processing complex, large-scale modernization of production facilities has been carried out in May 2013, its key step was the installation of a Swedish sawmill complex Soderhamn Eriksson, increase the production capacity of the "Red October" 2.5 times.

  • Raw materials warehouse
  • Raw materials warehouse

The idea of creating a new sawmill complex arose from the company’s management in 2005-2006. At the same time the complex was built kilns Baschild capacity to 100 million m3 per year, investments totaled 500 million euros.

In 2011, the Russo-Finnish company was purchased Timbermatic dry log sorting line capacity up to 300 m3 per year. This allowed the sorting timber diameters, resulting in a significantly reduced consumption of raw materials. Line 30 is equipped with pockets and meter production of the Russian company "Vector". The cost of the equipment was about 600 million euros, 200 million euros have been spent trying to build a foundation for this equipment.

  • Drying lumber
  • Drying lumber

In 2012, with the Swedish company Soderham Eriksson signed a contract for the supply of sawmill zavoda.Oborudovanie were purchased as part of an investment project in the area of forest that was included by the Ministry of Industry and Trade of the Russian Federation in January 2012 on the list of priorities. The investment amounted to 7.5 million euros.

The plans for 2013 — to install four kilns in the amount of 500 thousand euros. The estimated return on the project — about 8 years.

The new sawmill line.

The new sawmill line is a flexible manufacturing solution based on milling and bandmill line with recycling, the possibility of effective curve sawing and trimming the side boards with optimization. The line capacity is about 240 thousand m3 lumber per year, while working in three shifts.

The basis of the new production — Vertical Band Saw, return line and edging equipment Soderhamn Eriksson, chipper Bruks BK-DH 240 x 650, the combined timber sorting line Rosens & Co Maskin AB (Sweden), and the debarker Cambio 680.

As part of the modernization project was also made entry into the second stage of the boiler Komkont capacity of 5 MW. Before the upgrade, the plant produces 250 m3 of sawn timber per shift. After the modernization of production totaling 600 m3 per shift. The plant will operate in two shifts with the possible introduction of the third.

Like this post? Please share to your friends: