Red Boiler equipment for ships Kazan CHP-2

Taganrog Boiler Plant "Red Boiler" (the main production site of "EMA", which is part of the power engineering concern "Power Machines") has shipped the first units of recovery boilers for Kazan CHP-2, according to an official press release "Power Machines".
Sent to the station shields gas-tight casing flue outlet with supporting steel structure weighing more than 12.7 tons.
The contract for the design, manufacture and supply of equipment for the two new units PGU-110 Kazan CHP-2 of "EMA" and "MC" KER-Holding "signed in August 2011. Within the scope of the contractual obligations of power engineering company includes two HRSG general weighing about 1.8 tons. Designing and manufacturing of equipment is carried out under a license agreement between JSC "EMA" and the American company NOOTER / ERIKSEN, INC. design work carried out by experts engineering center "EMA-BSKB KU" (Barnaul) . equipment for the project is made at the Taganrog Boiler-Making Works "Red boilermaker." Complete supply of two heat-recovery specialists enterprises plan before the end of 2013.

Waste heat recovery boilers are designed to produce steam at high pressure and low pressure by utilizing heat of combustion products entering the CU after the exhaust from the gas turbine. The new equipment installed as part of two units PGU-110-2 Kazan CHP installed capacity of 110 MW each. Due to design decisions HRSG can operate at a high temperature of the gases entering into the inlet duct of the gas turbine unit KU (in normal operating mode, the gas temperature is 650 ° C).
In addition, in the construction of combined cycle power plants at Kazan CHP-2 is involved OAO "Kaluga Turbine Works" also a member of the group "Power Machines". At present JSC "KTZ" manufacturing and supplying two steam turbines of 36 MW each, and ensures the delivery of two turbine generators produced by "Electrotyazhmash — Drive" (Lisva Perm region).
Combined-cycle power units will be commissioned at the Kazan CHP-2 in Q4 2014 and Q3 2015. With the commissioning of the unit is the capacity of the plant will increase by more than 2 times and will be 410 MW. To date, the installed capacity of power plants is 190 MW.

Like this post? Please share to your friends: